When erecting and dismantling the full-scale scaffolding, the scaffolding board should be laid on the construction operation layer, and the workers should wear seat belts.
time2019/10/29
The outer end of the steel cantilever beam is not provided with steel wire rope or steel tie rod and the upper layer of the structure is inclined.
time2019/10/30
The scaffolding removal work is not carried out in the order of scaffolding removal, and the disassembled components are directly thrown to the ground.
time2019/10/30
Construction elevators and scaffoldings and other sides of the building passages shall be provided with protective railings,.
time2019/10/31
Safety technology disclosure: According to the requirements of safety measures and the actual situation on site, management personnel at all levels must personally submit written reports.
time2019/10/31
Bowl buckle steel foot structure accessories specifications and uses.
time2019/11/01
The wall pole setting should be connected as much as possible in the cross-bar layer bowl buckle joint, which is perpendicular to the scaffolding and the wall, and is set in time with the rise of the building and the shelf, and the plum blossom arrangement is adopted as much as possible.
time2019/11/01
Side attached attached scaffold application technology and there are some technical shortcomings in the new side-mounted attached lifting scaffolding.
time2019/11/04
In the screening of the implementation plan, pay special attention to the adaptive layout design of the scaffold in the engineering situation, as well as the safety and reliability detection of the scaffolding.
time2019/11/04
The acceptance of floor-standing scaffolding is described in six aspects: general requirements, materials, scissors support (master control), poles, foundations and wall-connecting parts.
time2019/11/05
The cantilevered outer frame is mainly described in terms of general requirements, materials, scissors, poles, wall-pieces, I-beams, diagonally-drawn steel wire ropes and closed maintenance.
time2019/11/05
The upper and lower scaffolding of the personnel must be safely connected to the access (ladder) road. It is strictly forbidden to climb the scaffolding up and down.
time2019/11/06
When performing electrical welding on scaffolding, lay iron sheets and then remove sparks or remove inflammables to prevent flaming materials from being on Mars.
time2019/11/06
There are many classification methods for attaching lifting scaffolds. According to the form of attachment support, it can be divided into: cantilever type, hanging type, rail type, guide type, etc.; according to different lifting power, it can be divided into: electric, chain hoist, hydraulic, etc.
time2019/11/07
The lifting scaffold is a tool-type scaffold that is divided into sections and does not fall.
time2019/11/07
Special personnel should be provided for scaffolding for regular inspection and maintenance work.
time2019/11/08
The disc-type steel pipe scaffold is generally used with a variety of auxiliary parts such as adjustable base, adjustable bracket and wall support.
time2019/11/11
The scaffold (fastener scaffold) and steel scaffolding planks to build sharing.
time2019/11/12
Scaffolding refers to the construction site for workers operation and solve the vertical and horizontal transportation and erection of all kinds of support on the scaffolding planks.
time2019/11/13
Compared to angle steel scaffolding, galvanized steel scaffolding has the following advantages
time2019/11/14
Dismantle scaffold should be performed in accordance with the provisions, and to remove large scaffold and high risk bigger independent scaffolding .
time2019/11/15
Fastener type, bowl of button and the door type steel pipe scaffold materials can be used for the construction formwork support frame, and each has its characteristics.
time2019/11/18
Ringlock can constitute a large scale, high, large span, cantilever, every, double bent framework, mobile rack, and other structures. Widely used in all kinds of engineering construction, Marine aircraft maintenance, system installation stage stand, etc.
time2019/11/19
It is prohibited to use the scaffold are unsafe. Use process pay attention to safety, prevent accidents.
time2019/11/20
Wheel button scaffolding arrangement needs, according to the actual situation to determine the construction, and must ensure the safety of the construction and normal operation.
time2019/11/21
Ringlock scaffolding quotation concerns, attention should be paid to the fundamental quality problems, such as a generality, bearing strength, firmly, this to help workers construction has a direct impact.
time2019/11/22
We are professional manufacturer of steel board, scaffolding, and other products, has many years of production experience, the introduction of advanced production technology and equipment, automated production process, and the scale of production is larger.
time2019/11/25
We are professional manufacturer of steel board, scaffolding, and other products, has many years of production experience, the introduction of advanced production technology and equipment, automated production process, and the scale of production is larger.
time2019/11/25
Zhonghong group production factory production of steel galvanized steel scaffolding planks has the arrangement of specifications forming convex hole, anti-slip coefficient is high, the effect is good, ensuring security.
time2019/11/26
Brief Intro on the Advantages of Ringlock Scaffolding Products
time2019/11/27
Scaffold of mobile Frame scaffold degree of longitudinal bar and the vertical rod of each become friends point throughout right-angle fastener connection must be taken.
time2019/11/28
Steel scaffolding planks for light weight, mobile convenience, installation is simple to use, must want to know their safety knowledge.
time2019/11/29
Steel scaffolding planks recovery rate is high, use fixed number of year is long, easy open device is convenient, make can still waste/garbage disposal.
time2019/12/02
Steel scaffolding planks, board face should level off, the plate deflection should not be more than 5.0 mm.
time2019/12/03
End plate flange and intermittent reinforcement plate used to strengthen the spot welding, prevent slippery galvanized steel scaffolding planks, weld should remain flat.
time2019/12/04
Scaffold made rod under uneven, solid or cant, must set up pad or plate.
time2019/12/05
In order to prevent corrosion, all countries in the world adopt the method of scaffolding plating coating to protect steel from corrosion.
time2019/12/18
Galvanized steel scaffolding planks has the fire, light weight, corrosion resistance, alkali resistance and high compressive strength, good appearance, durable and other characteristics,.
time2019/12/19
With the development of steel industry, the development of production technology, in the market, there are many kinds of steel, the steel board is one of them.
time2019/12/20
Due to the wooden planks, disadvantages of the stencil scaffold board and has gradually can not adapt to the scale of enterprise management mode. High strength galvanized steel scaffolding planks has become a trend of the construction and installation industry.
time2019/12/23
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.