The regulations for the laying of scaffolding boards or other working floors .
time2019/10/28
The regulations for the laying of scaffolding boards or other working floors .
time2019/10/28
The distance between the full hall scaffolding from the edge of the wall or other structures should be less than 0.5m, and railings should be placed around.
time2019/10/29
When erecting and dismantling the full-scale scaffolding, the scaffolding board should be laid on the construction operation layer, and the workers should wear seat belts.
time2019/10/29
Construction elevators and scaffoldings and other sides of the building passages shall be provided with protective railings,.
time2019/10/31
Safety technology disclosure: According to the requirements of safety measures and the actual situation on site, management personnel at all levels must personally submit written reports.
time2019/10/31
Side attached attached scaffold application technology and there are some technical shortcomings in the new side-mounted attached lifting scaffolding.
time2019/11/04
In the screening of the implementation plan, pay special attention to the adaptive layout design of the scaffold in the engineering situation, as well as the safety and reliability detection of the scaffolding.
time2019/11/04
The acceptance of floor-standing scaffolding is described in six aspects: general requirements, materials, scissors support (master control), poles, foundations and wall-connecting parts.
time2019/11/05
The cantilevered outer frame is mainly described in terms of general requirements, materials, scissors, poles, wall-pieces, I-beams, diagonally-drawn steel wire ropes and closed maintenance.
time2019/11/05
The upper and lower scaffolding of the personnel must be safely connected to the access (ladder) road. It is strictly forbidden to climb the scaffolding up and down.
time2019/11/06
When performing electrical welding on scaffolding, lay iron sheets and then remove sparks or remove inflammables to prevent flaming materials from being on Mars.
time2019/11/06
Special personnel should be provided for scaffolding for regular inspection and maintenance work.
time2019/11/08
The disc-type steel pipe scaffold is generally used with a variety of auxiliary parts such as adjustable base, adjustable bracket and wall support.
time2019/11/11
Scaffolding refers to the construction site for workers operation and solve the vertical and horizontal transportation and erection of all kinds of support on the scaffolding planks.
time2019/11/13
Dismantle scaffold should be performed in accordance with the provisions, and to remove large scaffold and high risk bigger independent scaffolding .
time2019/11/15
Fastener type, bowl of button and the door type steel pipe scaffold materials can be used for the construction formwork support frame, and each has its characteristics.
time2019/11/18
Ringlock can constitute a large scale, high, large span, cantilever, every, double bent framework, mobile rack, and other structures. Widely used in all kinds of engineering construction, Marine aircraft maintenance, system installation stage stand, etc.
time2019/11/19
It is prohibited to use the scaffold are unsafe. Use process pay attention to safety, prevent accidents.
time2019/11/20
Wheel button scaffolding arrangement needs, according to the actual situation to determine the construction, and must ensure the safety of the construction and normal operation.
time2019/11/21
Ringlock scaffolding quotation concerns, attention should be paid to the fundamental quality problems, such as a generality, bearing strength, firmly, this to help workers construction has a direct impact.
time2019/11/22
We are professional manufacturer of steel board, scaffolding, and other products, has many years of production experience, the introduction of advanced production technology and equipment, automated production process, and the scale of production is larger.
time2019/11/25
We are professional manufacturer of steel board, scaffolding, and other products, has many years of production experience, the introduction of advanced production technology and equipment, automated production process, and the scale of production is larger.
time2019/11/25
Zhonghong group production factory production of steel galvanized steel scaffolding planks has the arrangement of specifications forming convex hole, anti-slip coefficient is high, the effect is good, ensuring security.
time2019/11/26
Scaffold of mobile Frame scaffold degree of longitudinal bar and the vertical rod of each become friends point throughout right-angle fastener connection must be taken.
time2019/11/28
Steel scaffolding planks, board face should level off, the plate deflection should not be more than 5.0 mm.
time2019/12/03
Scaffold made rod under uneven, solid or cant, must set up pad or plate.
time2019/12/05
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.